Ch-tech Quad M-module Carrier i4000 Manuel d'utilisateur télécharger pdf (Page 10)

i4000 - Quad M-module carrier for VMEbus

User Manual Version: 1.2

AcQuisition Technology bv

P.O. Box 627, 5340 AP

Page 10 of 25 Oss, The Netherlands

3.2. CONNECTORS

3.2.1. MOUNTING AN M-MODULE

Four M-modules can be fitted on the i4000 carrier board. To plug in a module, position the 2-row 40 pole or

3-row 60-pole M-module interface connector of the module above the 2-row header P1 of the i4000. Then

push the module until the header connector is positioned and press the module with care in its place.

Note: With 3-row M-modules row C of the M-module interface connector is left unoccupied.

The module should be secured in its position using four screws (M3 * 5mm), refer to figure 1 for the positions

of the mounting screws.

Figure 1 M-module mounting screws

Module component side

Row a b c

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 24 25

Pas de commentaire

Ch-tech Quad M-module Carrier i4000 Manuel d'utilisateur Page 10